step 1
unzip and lay your spiritcape with the inside of the hood facing you..
![](//cdn.shopify.com/s/files/1/0472/7949/files/step-1.png?8658785922500676366)
step 2
use an x-acto knife to gently cut a 1/2 inch hole in the top white layer. cutting at an angle helps. and for godssake, use safety and all that..
![](//cdn.shopify.com/s/files/1/0472/7949/files/step-2.png?5787777295495788594)
step 3
cut a 1/2 hole through the middle blue layer. be even more gentle!
![](//cdn.shopify.com/s/files/1/0472/7949/files/step-3.png?6231515338279700589)
step 4
repeat steps 2 and 3 on the other side (and by other side, we mean the oooother side, not the outside of the hood!)..
step 5
insert the light tip through the white and blue layers. pro tip: start on the side of your dominant hand to use the light controller more easily..
![](//cdn.shopify.com/s/files/1/0472/7949/files/step-5.png?8126070750030837647)
step 6
gently feed the tip through the oooother side..
![](//cdn.shopify.com/s/files/1/0472/7949/files/step-6.png?1476583593841570957)
step 7
raaaage!
![](//cdn.shopify.com/s/files/1/0472/7949/files/9H8px9l.gif?11243070967393706539)